Asphalt emulsions are manufactured by milling asphalt cement (bitumen) into microscopic particles and dispersing them in water using a chemical emulsifier. The tiny droplets of asphalt remain uniformly suspended until the emulsion is used.
Specifications – McA Proprietary Emulsions
Proprietary Branded Emulsion Specification Table
Specifications – McA Polymer Modified Emulsion
Polymer Modified Emulsion Specification Table
Research – Development and Field Evaluation of High Performance and Fuel Resistant Asphalt Mixture
2018-CTAA-Development and Field Evaluation of High Performance and Fuel Resistant Asphalt Mixture
Research – Examining an Accelerated Wet Track Abrasion and Schulze-Breuer and Ruck Test for Micro-surfacing Mix Design
2018-CTAA-Examining an Accelerated Wet Track Abrasion and Schulze-Breuer and Ruck Test for Micro-surfacing Mix Design
Research – New Brunswick Field Study on Optimization of Tack Coat Rate to Enhance Interface Bonding of Asphalt Layers
2019-TAC-New Brunswick Field Study on Optimization of Tack Coat Rate to Enhance Interface Bonding of Asphalt Layers
Research – 12-Year Performance Review of Bloomington Road (York Region Road 40) Rehabilitation using Cold In-Place Recycling and a 6.7 mm Fine Stone Mastic Asphalt
2017-CTAA Twelve-Year Performance Review of Bloomington Road (York Region Road 40) Rehabilitation using Cold-In-Place Recycling and a 6.7mm Fine Stone Mastic Asphalt
Research – Mixture Design and Field Experience: Coloured Hot Mix Asphalt on Bus Rapid Transit (BRT) Lanes in Ontario
2017-CTAA-Mixture Design and Field Experience of Red Hot Mix Asphalt on Bus Rapid Transit (BRT) Lanes in Ontario
Research – Development and Evaluation of a Non-Tracking Asphalt Emulsion for Tack Coats and Fog Seals
2017-CTAA-Development and Evaluation of a Non-Tracking Asphalt Emulsion for Tack Coats and Fog Seals