Cationic Emulsions

There are three major classifications of emulsion grades: rapid-setting, medium-setting, and slow-setting. The terms “rapid,” “medium,” and “slow” relate to the amount of time it takes for the emulsion to cure and the amount of mixing that can be performed before the emulsion breaks. Emulsions that allow for the longest mixing times generally take the longest to cure, while emulsions that allow for very little mixing time are those that set and cure most rapidly.

Chemical surface-active agents, serving as emulsifiers, are classified by the electrochemical charge that is attained when they dissociate in a water solution. In the case of cationic emulsions, the chemical charge is positive. The chemical type and quantity of surface-active agents used in the manufacturing process governs the process in which the resulting asphalt emulsion can be used.

Safety Data Sheets

Description	Pdf File
SDS – Cationic Emulsion Breaking Agent
SDS – Cationic Medium Setting Emulsion
SDS – Cationic Quick Setting Emulsion
SDS – Cationic Rapid Setting Emulsion
SDS – Cationic Slow Setting Emulsion
SDS – Enviro-Colle Emulsion

Related Resources

Description	Pdf File
Research – Deep Cold In-Place Recycling with Emulsion Cement
Research – A General Method of Design for Seal Coats and Surface Treatments
Research – Introduction to Asphalt Emulsions
Research – Overview of the Design of Emulsion Based Seal Coat Systems in Canada and Abroad
Research – Performance Review of Micro Surfacing and Slurry Seal Applications in Canada
Research – Adhesive and Cohesive Properties of RS Emulsions during Chip Seal Construction
Research – Recovery Method on Properties of CQS Residues and Their Correlation to Micro Performance
Research – Surface Slurry Sealing Systems in Canada: Performance and Practice
Research – Usage of Emulsion Mixes to Mitigate the Effect of Subgrade Movements
Research – Base Stabilization, Cationic Emulsions, High Float Emulsions, Polymer-Modified Emulsions
Specifications – McA Cationic Emulsions
Product Data Sheet – Blackmac Emulsion Sealer
Product Data Sheet – CCM-5
Product Data Sheet – CHP-2m
Product Data Sheet – CHP-2mP
Product Data Sheet – CHP-2r
Product Data Sheet – CHP-2rP
Product Data Sheet – CRS-2
Product Data Sheet – CRS-2P
Product Data Sheet – CSS-1
Product Data Sheet – CSS-1H
Product Data Sheet – Rejuvenite A
Product Data Sheet – Rejuvenite B
Product Data Sheet – Rejuvenite S
Fact Sheet – Slurry Micro Systems
Fact Sheet – Cold Mixed Asphalts
Fact Sheet – Seal Coating
Fact Sheet – Bond Tack Coats & Primers
Fact Sheet – Recycling & Rehabilitation
Pavement Process Overview – Dense Graded Cold Mixes
Pavement Process Overview – Open Graded Cold Mixes
Product Data Sheet – Cationic Clean Bond Coat
Product Data Sheet – CQS-1HP
Product Data Sheet – Colasphalt Tack
Product Data Sheet – CMS-2
Product Data Sheet – HF-1000M