Anionic Emulsions
There are three major classifications of emulsion grades: rapid-setting, medium-setting, and slow-setting. The terms “rapid,” “medium,” and “slow” relate to the amount of time it takes for the emulsion to cure and the amount of mixing that can be performed before the emulsion breaks. Emulsions that allow for the longest mixing times generally take the longest to cure, while emulsions that allow for very little mixing time are those that set and cure most rapidly.
Chemical surface-active agents, serving as emulsifiers, are classified by the electrochemical charge that is attained when they dissociate in a water solution. In the case of anionic emulsions, the chemical charge is negative. The chemical type and quantity of surface-active agents used in the manufacturing process governs the process in which the resulting asphalt emulsion can be used.
Safety Data Sheets
| Description | Pdf File |
|---|---|
| SDS – Anionic Medium Setting Emulsion |  |
| SDS – Anionic Rapid Setting Emulsion | |
| SDS – Anionic Slow Setting Emulsion | |
| SDS – Enviro-Prem | |
Related Resources
| Description | Pdf File |
|---|---|
| Research – Asphalt Surface Treatments and Seal Coats |  |
| Research – A General Method of Design for Seal Coats and Surface Treatments | |
| Research – Introduction to Asphalt Emulsions | |
| Research – Overview of the Design of Emulsion Based Seal Coat Systems in Canada and Abroad | |
| Research – Bio-Solvents in the Production of Emulsified Prime Coat Systems | |
| Research – 12-Year Performance Review of Bloomington Road (York Region Road 40) Rehabilitation using Cold In-Place Recycling and a 6.7 mm Fine Stone Mastic Asphalt | |
| Research – New Brunswick Field Study on Optimization of Tack Coat Rate to Enhance Interface Bonding of Asphalt Layers | |
| Specifications – McA Anionic Emulsions |  |
| Product Data Sheet – ACM-5 |  |
| Product Data Sheet – Clean Bond Coat | |
| Product Data Sheet – Enviro-Prem | |
| Product Data Sheet – HF-150P | |
| Product Data Sheet – HF-150S | |
| Product Data Sheet – HP-200 | |
| Product Data Sheet – PAPvlw | |
| Product Data Sheet – RS-1 | |
| Product Data Sheet – SS-1 | |
| Fact Sheet – Slurry Micro Systems |  |
| Fact Sheet – Cold Mixed Asphalts | |
| Fact Sheet – Seal Coating | |
| Fact Sheet – Recycling & Rehabilitation | |
| Pavement Process Overview – Tack Coats |  |
| Pavement Process Overview – Chip Seals | |
| Pavement Process Overview – Dense Graded Cold Mixes | |
| Pavement Process Overview – Dense-Graded Seal Coats | |
| Pavement Process Overview – Open Graded Cold Mixes | |
| Pavement Process Overview – Rejuvenating Seals | |
| Field Trial – Hot Mix Asphalt over Enviroprem Trial, Rte 8/Rte 107, Connector |  |
| Product Data Sheet – Colasphalt Prime | |
| Product Data Sheet – CSPE | |
| Product Data Sheet – HP-200P | |
| Product Data Sheet – HF-250S | |
| Product Data Sheet – HF-500M-HR | |
| Product Data Sheet – HP-400 | |
